Sailing

Waxed Whipping Twine Kit - 0.8mm x 40M - Dark Navy BlueExcellent for whipping line ends, this twine is pre-waxed with a round construction and wil...

Split Cotter Ring - 18.8mm(3/4") IDSuits clevis pins RF260 - RF274Grade 316 Stainless Steel

Shock - 3/16" Line - 1/4" Webbing - Grey - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections...

Split Cotter Ring - 25mm(1") IDSuits clevis pins RF267 - RF278Grade 316 Stainless Steel

Ferrule Eye Saddle - 9mm(3/8") ClearanceGrade 316 Stainless Steel28mm(1-1/8") screw to screw length Specifications: Color: Stainless Box Dimension...

Series 20 Ball Bearing Block - SingleFeatures: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves r...

Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope DiameterSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stai...

RF4055 ClearStart™ 50mm Sailing Watch - Blue/GreyInnovative Race Functions with Bold StylingRonstan has taken the popular 50 mm (2") size and feat...

Sticky Race Gloves - 3-Finger - Black - SFeatures: Synthetic leather for maximum durability, minimum stretch and shrinkage Double aramid stitched ...

Series 30 Ball Bearing Orbit Block™ - DoubleBall Bearing Orbit Blocks™ boast the highest strength-to-weight ratio available. This is achieved thr...

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also ...

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also u...

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also u...

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be ...

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sh...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. She...

Add-A-CleatA versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Constru...

BPG-50 Bulkhead Pipe Gland 50mm ODThe Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The requi...